欢迎访问苏州丰硕自动化设备PK10计划
产品中心
联系我们
    苏州丰硕自动化设备PK10计划
    苏州
    电  话:
    0512-66300668/66557556
    手  机: 13912610668/13913176973
    Email: lgr720707@126.com
    地  址: 苏州市吴中区临湖镇石庄工业区B1幢
       
    成都  
    手  机: 15928129100
    电  话: 028-87535191
    Email: lghbylp@163.com
    地  址: 成都市高新区天府一街1399号
       
    网  址: www.maximcomre.com
      www.feeson.cn 
      www.jsfeeson.com 
      www.szfeeson.com

  • 老化房
  • 2016-03-10 17:00:00
  • \

    老化房,又叫老化室、烧机房,是针对高性能电子产品仿真出一种高温、恶劣环境测试的设备,是提高产品稳定性、可靠性的重要实验设备、是各生产企业提高产品质量和竞争性的重要生产流程,该设备广泛应用于电源电子、电脑、通讯、生物制药等领域。
    老化房简介
      CLM型老化房,又叫高低温试验室或温升房,是针对高性能电子产品(如:计算机整机,显示器,终端 机,车用电子产品,电源供应器,主机板、监视器、交换式充电器等)仿真出一种高温、恶劣环境测试的设备,是提高产品稳定性、可靠性的重要实验设备、是各生产企业提高产品质量和竞争性的重要生产流程,该设备广泛应用于电源电子、电脑、通讯、生物制药等领域。根据不同的要求配置主体系统、主电系统、控制系统、加热系统、温度控制系统、风力恒温系统、时间控制系统、测试负载等,通过此测试程序可检杳出不良品或不良件,是客户迅速找出问题、解决问题提供有效手段,充分提高客户生产效率和产品品质。,也是针对于开关电源、手机充电器 、电池、LCD、主板机、扫描器、监视器、介面卡等做负载或温度老化测试的一种设备,此设备外框架构采用保温库板隔间组合而成,配上主配电箱、测试架、温度控制器、定时器、各种电器开关、加温电热器、盘架、拉门、循环风机、排风机、插座等设备模拟出一种高温、恶劣环境(40℃ -70℃±5℃、电源ON-OFF动作等),让产品在此环境中接上模拟负载通电运作,测试时间可在0-99.9小时内任意设定,通过此测试程序可查出不良品或不良零件,是制程、品管必备之设备。由于老化房的性能及环境必须保证产品所需要的温度、电源质量、负载量、工作时间及操作人员的安全、习惯等要求,所以,一套合格的老化设备,应该是一套安全可靠,高效节能、功能齐全和具有可扩充性的设备。
    产品用途:广泛应用于电源电子、电脑、通讯、生物制药等领域。
    老化房分类
    一,房间隔离式测试系统型
      房间隔离式老化房房间尺寸均根据客户要求设计,进出门采用保温推拉门或双开保温门,另根据需要可设置观察窗,方便在室外观察到室内产品测试情况。如需电源提供则在方便操作的位置安装电源插座,以满足产品老化测试时的需要,特点:对产品的样式与台车的样式要求低,活动空间大,结构简单,成本较低。
    二,Chamber隔离式测试系统型
      Chamber隔离式老化房房间尺寸均根据客户要求设计,测试区采用推拉门及大视角玻璃视窗,如产品需要电源提供,则采用国内名牌插座固定在产品架线槽上或固定在测试区方便操作的位置。特点:可使操作人员在不用进入老化房[1]测试区内就可以上下测试产品并可测试过程中一目了然的看到产品的B/I状况;免去操作人员进入老化房室内经受房体过热之苦、更能节约能源。
    三,移动式测试系统型
      移动式老化房在本公司直接加工为成品(如需求体积太大既在客户现场拼装而成),台车尺寸均根据客户要求设计。适合于产量少或研发试验产品小批量测试,,其它部分与Chamber测试系统相似,特点:占地面积小,可以随时搬迁移动。
    老化房详细资料
    1.主要技术参数:
      1.1 温度范围:RT+10~400℃
      1.2 温度波动:±0.5℃;
      1.3 温度偏差:最大精度±2℃(可根据客户要求设计精度,在一定条件下最高可以做到±1℃)
      1.4 房内尺寸:温度可以订制
      1.5 运行方式:温度可调,恒定运行或程序运行(可选触摸屏式程序运行)
      1.6 安装电源:AC~380V;50 Hz;
      1.7 噪音大小:≦65分贝
      1.8产品型号: CLM-LHF-010、CLM-LHF-020、CLM-LHF-030、CLM-LHF-040、CLM-LHF-050
    2:室体结构及用料说明:
      2.1 墙体材料:库体采用双面彩钢保温库板(EPS板、聚氨酯板或岩棉板)拼装而成,板材厚度由老化房本身的需求和客户的要求双向进行选择,库板板材厚度有50mm、60mm、70mm、100mm等规格,彩钢板的厚度有0.326mm、0.5mm等规格,整个库体采用钢架结构,铝型材等固定支撑,库体内外采用铝型材或不锈钢板包边;(地面处理部分根据客户要求),接合处打密封玻璃胶,有效保证房间的密封性与美观性。(房体材料的燃烧性能符合《建筑材料燃烧性能分级》B2级的规定。
      2.2 门洞与视窗设计:根据实际要求;
    3:风力恒温系统;
      风力管道系统符合《通风与空调工程施工质量验收规范》GB50243-2002标准,通常采用循环系统、加热系统和超温排风系统组成。循环系统、超温排风系统、加热系统及配套的风道系统安装于老化房顶部,不占用其它空间,,循环系统采用循环风机和配套风管进行循环,可保证测试区内温度均匀,加热系统采用电热器加热,加热器放置于老化房顶上循环风道中,四周加防火隔热材料。采用PLC温度模块或PID仪表控制,温度到达产品所需要温度后,根据室内温度波动自动调节加热器功率大小配合保温库板的保温性,使室内温度精确稳定在所设定温度数值可在指定的时间内内将室温加至设定温度,当温度升至设定值时加热器停止加热.加热器具有过热保护装置(EGO),如客户自身产品发热则采用过热排风系统,发热量小采用电动百叶自动负压排风,发热量大则采用低噪音风机排风,用变频器控制其转速。
      循环控温过程:当开机时加热器开始加热 温度到达设定值时加热器停止加热 随着时间的推移产品区温度会逐渐上升当温度超过设定上限时 排风系统开始动作将产品区过热气体排室外。变频器会控制室外排风机进行运转,当温度下降至设定值下限时风机停止排风,排风系统同时关闭。循环系统在老化产品的过程中始终保持循环状态,以保证温度均衡。整套系统动作具有性能稳定,控制精确、温度波动小,均衡度高、噪音小等特点。
      噪音处理:采用低分贝的高品质循环风机,风管采用3mm厚石棉包裹,既保温又降低噪音,根据声学原理,所有动态部位采用帆布、弹簧进行软接处理,力求把噪音降到最低标准。
    4:老化房控制系统;
      采用两级PID调节加热量,实现对测试区(产品区)温度的精确控制,同时温度控制器可以对测试区任意温度进行滚动实时显示,有独立负载的还可以对负载区的温度进行监控,防止负载区温度过高,方便客户准确掌握测试区温度情况。控制系统还设定了各种保护功能,有超温报警保护、风机故障报警保护、无风报警保护、室内烟气感应报警保护等,完善的保护功能确保了老化房能长期稳定无故障运行。(可选PLC来控制)
    5:产品测试架:(可选)
      产品测试架通常根据客户产品和要求进行设计制。如需负载,则做相对应的负载框架配套生产,一般测试架的设计要求结构稳固合理,操作方便,外形美观、满足功能等特点,最大限度的满足客户的要求。
    6:控制系统设计以及安全保护措施:
      6.1电控设计参照《低压配电设计规范》GB50054-95,《供配电设计规范》GB5002S2-95,《电气装置安装工程接地装置施工及验收规范》GB50169-92,使电控设计标准化。
      6.2控制系统集成老化功能设计。设计功能控制电柜,老化所需时间、温度、各类操作开关可在一个控制电柜上操作;电柜面板设计美观、操作简单。
      6.3老化过程可全自动控制,具有部分异常自处理功能,让操作自动化、简单化。
      6.4具有多重保护功能,安全可靠。
      a.电热防干烧,风机故障或风管内温度过高时自动切断循环系统电源,同时警报器报警。
      b.电加热与风机联动设计,风机未能启动时加热器无法单独启动,在关闭时电热与循环风机同时关闭,防止电热因干烧而损坏。
      c.加热器连接采用耐高温线材,300OC不燃烧。
      d.室内安装防爆型照明灯,提高灯泡寿命,防止灯泡爆破。
      e.库体采用难燃保温材料,保温性能好,安全系数高。
      f.超温声光报警功能:老化过程中出现超温状况,则亮红灯,蜂鸣器响起。
      g.烟雾报警功能:室内装有烟感报警器,预防在老化产品的过程中某种原因使产品燃烧而报警,在报警时自动关闭老化房电源。
    老化房成本的决定因素
      老化房成本的决定因素
      老化房价格组成由下面几个因素组成
      1: 房间大小(房间大小决定风机选型,风机数量,风管大小)
      通常市面有轴流风机、离心风机、风柜来制作
      轴流风机安装于老化房顶部,在天花上装根据风机的数量装相应的百叶窗口,采用上面出风上面回风的概念,此方法造价低廉,温度均匀度可控性不高,因为热气是从下往上的
      离心风机安装于老化房顶部,再根据风机的功率以及房间的大小设计相应的风管数量,每条风管连接至室内底部,在每条风管上安装2个双层百叶出风口,出风口可以调节出风的方向。然后再从顶部的回风口出风进行循环。一般房间不是很大的老化房采用离心风机主。
      风柜主要是老化房的房间太大、跨度过宽、温度均匀度要求过高才用,如果房间很大的话用离心风机数量相应增加,噪音将会很大。此造价成本很高,
      2:温度范围(温度范围不同选用材料不同)
      目前市面上常用的保温材料是高密度硬质聚氨酯发泡。外表为304不锈钢,它的最高耐温为85度,硬度好,型质佳,尤其是大尺度的老化房,必须采用该材料,拆装也比较容易,便于老化房搬迁。但是价格相对较贵,但一般专业的公司都会使用。
      另外EPS彩钢板主要用于常温到60度范围的老化,EPS彩钢板俗称泡沫板,不阻燃,它不符合《建筑材料燃烧性能分级》B2级的规定,在60度以下长期使用没有问题,岩棉彩钢板是在老化温度为60度以上但是该两种材料,硬度较弱,厚度较厚,也比较沉重,大型的老化房,有塌陷的危险,也不利于拆装搬迁,但价格相对便宜。很多非专业的公司,从生产成本考虑,会选择,但售后也会相当麻烦。
      3:需要老化的产品以及产品功率(产品的不同涉及到产品是否发热,功率涉及到里面供电的配置)
      老化产品的功率:在老化房内,要给产品的老化架供电,功率涉及到线材的大小和数量,如果产品发热涉及到线材采用民用或军用线材。
      4:温度均匀度要求
      老化房的温度一般40度的时候±1℃,50的时候±3℃,60℃
      以上为±5℃,如果60℃以上均匀度要求过高的话可以采用PLC实行多点控制或是以子母机的方式来控制。
      5:常做老化的温度点和产品的总功率(涉及到排风系统,排风是根据房间大小温度范围和产品的功率来恒定在谋个温度点,当产品发热过高的时候排风机运转保证温度控制在设定的温度)
      老化房的常做温度点:涉及到排风系统,根据老化房内产品的总功率(发热功率),然后根据需要很定的温度,通过相应的公式算出排风机的功率,排风管的大小。目前市面上最先进的是热风循环技术,这种温度均匀性很好。
    老化房的特点
      1. 温度控制准确,精度高。由于采用了独特的风道系统设计及电控系统,能保持整个房间温度高度均匀性,大大高于同类产品。
      2. 房间设定温度范围广,连续可调。在常温+5℃--60℃(常温+5℃--80℃)范围内可任意设定。若客户特别要求,可设计更高温度产品。
      3. 系统保护功能齐全,能确保安全长期稳定无故障运行。
      4.试验室结构设计先进合理,配套产品和功能元器件具有领先同行的先进水平,能够适应长期、稳定、安全、可靠的生产需求。能够满足用户为从事上述用途的加工生产要求,且使用、操作、维修方便,使用寿命长,造型美观,有良好的用户界面,使用户的操作和监测都更加简单和直观。
      5.设备主要部件选用国内外知名品牌厂家的优质产品,确保整机的质量和性能
      6. 外形美观,施工方便,施工周期短。
    注:本试验设备禁止
      1:易燃、爆炸、易挥发性物质试样的试验及储存
      2 :腐蚀性物质试样的试验及储存
      3:生物试样的试验或储存
    4:强电磁发射源试样的试验及储存
    公司简介
    苏州丰硕自动化设备PK10计划前身是苏州华达机电设备厂,本公司是一家专业从事液体、粉体无尘涂装设备工程和自动化输送设备工程的现代高新科技企业。公司融工程的规划﹑研发、制造﹑安装、服务、技朮整厂输出为一体,实行产品研发、生产、安装、销售、销后一条龙服务。面向用户以卓越的产品质量、完善的服务体系,最高的工作效率满足客户的需求。产品广泛应用于:汽车工业、摩托车工业、3C产业(手机、电脑、家电)、装饰建材、运动器材、木器家私、工程机械、灯饰、电子等产业。
    随著现代经济、科技的高速发展,我们时刻注重加强对国内外先进自动化技术的引进和借鉴,公司以国内知名企业为市场依托,凭藉自身的技术优势先后与多家箸名品牌企业建立了良好的合作关系。如日本松下半导体PK10计划、台湾富士康集团、青岛海尔集团、苏州明基电通、德国博世汽车部件(苏州)PK10计划、韩国三星电子(苏州)PK10计划、苏州华硕电脑PK10计划、台湾统一集团、台湾可胜科技、上海大众汽车PK10计划、上海沪豪汽车部品PK10计划、美国洛德机械(上海)PK10计划等知名企业承接了数拾套大型涂装工程和自动化输送设备工程,并提供了优质服务及技术指导,时逢盛世丰硕愿携全体同仁将以“品质为本,缔造卓越”的原则,与国内处各企业共创商海新潮。
    专业生产:
    涂装设备:塑胶喷涂线,五金粉体,液体烤漆线,五金前处理生产线,涂装线,丝印线,水濂柜,静电除尘柜,喷漆台,UV固化炉,IR固化炉,
    烘干设备:烤箱,无尘烤箱,防爆烤箱,防氧化冲氮烤箱,隧道炉,老化房,
    输送设备:输送线,流水线,总装线,滚筒线,链板线,倍速链线,组装线,
    无尘净化设备:无尘隔间,环氧地坪,传递窗,洁净工作台,洁净棚,采样车,
    环保设备:鲜风柜,中央空调,净化柜,二次净化柜,废气处理,集尘箱,
    测试设备:恒温恒湿测试机,寿命测试机,拉力测试机,盐雾测试机,环境测试机
     
    联 系 人: 连根荣 经理 
    经营地址: 中国 江苏 苏州市吴中区临湖镇石庄工业区B1栋 
    邮  编: 215106 
    公司电话: 86 512 66300668-801 
    传  真: 86 512 66300667  
    手  机: 13912610668 
    电子邮箱: skyfeeson@yahoo.cn 
    公司主页:
    Aging room, also called aging chamber, burning room, simulation is for high-performance electronic products give a kind of high temperature, bad environment testing equipment, is one of the important experimental equipment to improve product stability, reliability, and is the production enterprise important production to improve product quality and the competitive process, the equipment is widely used in power electronics, computer, communication, biological, pharmaceutical and other fields.

    Aging room introduction

    CLM aging room, also called high and low temperature laboratory or room temperature, is for high-performance electronic products (such as: computer machine, monitors, terminal machine, automobile electronic products, power supply, motherboard, monitors, switching charger, etc。) the simulation of a kind of high temperature, bad environment testing equipment, is one of the important experimental equipment to improve product stability, reliability, and is the production enterprise important production process, to improve product quality and the competitive the equipment is widely used in power electronics, computer, communication, biological, pharmaceutical and other fields。 According to the requirements of different configuration subject system, the main electrical system, control system, heating system, temperature control system, wind, temperature, time control systems, test load, etc。, through this test to check out the bad product or bad thing, nor is a customer provide effective means to quickly find and solve problems, to fully improve customer production efficiency and product quality。 , but also for switching power supply, cell phone chargers, batteries, LCD, main machine, scanner, monitor, and interface card do a load or temperature aging test equipment, the equipment outside frame structure with heat preservation library board compartment, deserve to go up the main distribution box, test rack, all kinds of electric switch, temperature controller, timer, heating heater, plate frame, sliding door, circulation fan, exhaust fan, socket and other equipment to simulate a kind of high temperature, bad environment (40 ℃ to 70 ℃ + / - 5 ℃, power ON - OFF action, etc。), make the product in this environment to simulate the load power, test time can be arbitrarily set at 0-99。9 hours, through this test procedure can be found to bad product or bad parts, is necessary for process, quality control equipment。 Because of the performance of aging room and environment must ensure the quality of products the required temperature, power, load, working time and the safety of the operators, habits and other requirements, therefore, a qualified aging equipment, should be a safe and reliable, high efficiency and energy saving, important function has the scalability of the equipment。

    Product use: is widely used in power electronics, computer, communication, biomedical and other fields.

    Aging room classification

    A, the room type isolation type test system

    Isolation room type aging room room size are designed according to customer requirements, to go out into the insulation sliding door or double insulation door open, the other can be set according to need observation window, convenient in outdoor observed indoor product testing. For power supply is convenient in operation the location of the installation power socket, so as to meet the needs of product aging test, the characteristic: low requirements for the style of the product and the style of the car, activity space, simple structure and low cost.

    Second, Chamber type isolation type test system

    Aging Chamber isolation type room room size are designed according to customer requirements, test area adopts sliding door and large Angle of glass Windows, such as product need power supply, domestic famous brand is adopted at fixed socket on the product lines of slot or fixed in the position of testing area and convenient operation. Features: can make the operator in [1] don't have to enter the aging room test area can test the product and testing process be clear at a glance up and down the picture of product B/I see; From operating personnel entering aging room indoor weather room body of overheating, can save energy more.

    Three, movable type test system

    Mobile aging room directly processing to finished products in our company, such as demand volume is too big at the scene of the customers both assembled), pallet size are designed according to customer's requirement. Suitable for production or research and development test product small batch testing, less, other parts similar to Chamber test system, features: cover an area of an area small, can move move at any time.

    Aging room details

    1. The main technical parameters:

    1.1 temperature range: RT + 10 ~ 400 ℃

    Temperature fluctuation: 1.2 + / - 0.5 ℃;

    1.3 temperature deviation: maximum precision plus or minus 2 ℃ (according to customer request design precision, under certain conditions the highest can be + / - 1 ℃)

    1。4 size: inside the room temperature can be custom-made

    1。5 operation modes: constant temperature is adjustable, running or program is run (optional touch screen program is run)

    1.6 installation power supply: AC ~ 380 v; 50 Hz.

    Size: 1.7 noise ≦ 65 decibels

    1.8 product model: CLM - LHF - 010, CLM - LHF - 020, CLM - LHF - 030, CLM - LHF - 040, CLM - LHF - 050

    2: the room structure and materials:

    2.1 wall materials: library of used double-sided color steel heat preservation library board (EPS board, polyurethane board or rock wool board) to assemble and become, plate thickness requirements and customer requirements by the aging room itself two-way selection, library board plate thickness of 50 mm, 60 mm, 70 mm and 100 mm specifications, choi steel thickness of 0.326 mm, 0.5 mm, such as specifications, the whole library adopts steel structure, aluminum and other fixed support, library use aluminum or stainless steel plate edge in vivo and in vitro; (ground processing according to customer requirements), joint sealing glass glue, effectively guarantee the sealing of the room with the beautiful sex. (building materials combustion performance is in line with the building materials combustion performance grade B2.

    2。2 door and window design: according to the practical requirements;

    3: wind constant temperature system;

    Wind pipe system in accordance with the ventilation and air conditioning engineering construction quality acceptance specification "GB50243-2002 standard, usually adopt circulation system, heating system and overtemperature of exhaust system. Circulation system and overtemperature exhaust system, heating system, and form a complete set of aging air duct system installed on the roof, not occupy other space, and circulation system adopts the circulation fan and duct for circulation, can ensure uniform test zone temperature, heating system using electric heater heating, circulating air duct heater placed on aging the roof, fireproof and heat insulation material. PLC module or PID temperature control, temperature, temperature reaches the product need according to the indoor temperature fluctuation automatically adjust heater power size with heat preservation, heat preservation library board to make indoor temperature precise and stable in the numerical can set temperature to room temperature within a specified period of time to add to the set temperature, heater stop heating when the temperature rose to set value. The heater has overheating protection device (eog), such as the customer's own product fever is the hot exhaust system, small heat negative pressure ventilation, using electric shutter automatic calorific value is with low noise fan, exhaust, with a frequency converter to control its speed.

    Circulating temperature control process: when the heating temperature of heater to reach the set value when the phone is switched on heater stop heating With the passage of time the product zone temperature gradually rises when the temperature more than set time limit Exhaust system began to action of overheating or vent outdoor products area. Inverter can control room should be run, outside the fan when the temperature dropped to under the set value limit stop exhaust fan, exhaust system and close. Circulation system in the process of aging products always maintain circulation state, to ensure the equilibrium temperature. The system has stable performance, control precision, small temperature fluctuations, equilibrium degree is high, low noise, etc.

    USES low decibel noise treatment: the high quality of circulation fan, duct using 3 mm thick asbestos packages, heat preservation and reduce noise, according to the principle of acoustics, canvas, spring is adopted to improve the soft all dynamic parts processing, makes every effort to keep noise to a minimum standard。

    4: aging room control system;

    By two-stage PID plus heat, realize the accurate control of test area (area) temperature, at the same time temperature controller can be arbitrary temperature rolling real-time display of test area, independent of load can also be to monitor the temperature load, to prevent the load zone temperature is exorbitant, facilitating the clients to accurately grasp the test zone temperature. Control system also set up various protective functions, overtemperature alarm protection, fan fault alarm protection and alarm protection, there is no wind indoor smoke sensor alarm protection, perfect protection function to ensure the aging room can long-term stable trouble-free operation. (optional PLC to control)

    5: product test frame: (optional)

    Product testing frame is usually according to customer requirements and product design system. If you want to load, then do the corresponding load framework supporting production, the design requirements of general test frame structure reasonable, easy to operate, beautiful appearance and meet the function characteristic, the maximum to meet customer requirements.

    6: control system design and safety protection measures:

    6.1 electric control design reference specifications for design of low-voltage distribution GB50054-95, the power supply design specification GB5002S2-95, the electric device installation and acceptance specification for construction of grounding device GB50169-92, standardize electrical control design.

    6.2 aging control system integration function design. Electrical control cabinet design function, aging temperature and time, all kinds of required switch can be controlled in a electric ark operation; Electrical counter board design is beautiful, operation is simple.

    6。3 aging process can be fully automatic control, has some abnormal since the processing function, make automation, simple operation。

    6。4 with multiple protection function, safe and reliable。

    A. electric heating dry, the fan fault or circulatory system power will be shut off when the air temperature is too high, alarm and alarm at the same time.

    B. linkage design, electrical heating and fan fan failed to start the heater can't separate start, at the same time in the closed electric heating and circulation fan shut down, prevent damage of electric heating due to dry burn.

    C. heater connection using high-temperature wire, 300 oc not burning.

    D。 indoor installation type explosion-proof lighting, increase lamp life, prevent the light bulb blasting。

    E。 library with flame retardant insulation materials, heat preservation performance is good, high safety coefficient。

    F. overtemperature sound and light alarm function: overtemperature condition, appeared in the process of aging is bright red light, buzzer sounds.

    G。 smoke alarm function: indoor equipped with smoke alarm, to prevent some reason make the products in the process of aging products combustion and alarm, the alarm automatically shut down when the aging room power supply。

    The decision of the aging room cost factors

    The decision of the aging room cost factors

    An aging house price is composed of the following factors

    1: room size (room size decide the fan selection, fan, air duct size)

    Market usually have axial flow fan, centrifugal fan, wind ark to make

    Aging axial flow fan installed on the roof, according to the number of fan is installed in the smallpox corresponding shutter window, use the wind above the concept of return air, the cost of this method is low, temperature uniformity control is not high, because the heat from down to up

    Aging centrifugal fan installed on roof, then according to the power of the fan and the size of the room, the number of the corresponding duct design, each duct connected to the base of indoor, in each of the duct is installed on two double shutter outlet, outlet can adjust the direction of the wind. Then from the top of inlet wind circulation. Average room is not very big aging room USES the centrifugal fan of the Lord.

    If the wind GuiZhu aging room room is too big, too wide span, high temperature uniformity requirements to use, if the room is big with centrifugal fan quantity increase, the noise will be very big. The cost is very high,

    2: temperature range (temperature range to choose different materials different)

    On the market at present commonly used thermal insulation material is high density rigid polyurethane foam. Appearance of 304 stainless steel, its maximum heat resistance of 85 degrees, good hardness, best quality, especially the large scale of the aging room, must use the material, tear open outfit is easy, easy aging room to move. But the price is relatively expensive, but usually will use professional company.

    Other EPS choi steel is mainly used for the ageing of the scope of normal temperature to 60 degrees, EPS choi steel, commonly known as foam board is not flame retardant, it is not in conformity with the "building materials combustion performance classification" the regulation of B2, use for a long time have no problem under 60 degrees, and rock wool color steel plate is in ageing temperature for more than 60 degrees, but the two kinds of material hardness is weaker, the thickness of the thicker, also more heavy, the ageing of the large room, is in danger of collapse, is unfavorable to dismantling to move, but the price is relatively cheap。 Many non-professional companies, from the production costs, will choose, but after will be troublesome。

    3: need aging products and power products (product involves various products whether fever, power involved in the power supply configuration)

    Aging products of power: in the aging room, to give the product of aging aircraft power supply, power involves the wire size and quantity, if the product heating involves the wire by civilian or military wire。

    4: the temperature uniformity requirements

    Aging room temperature 40 degrees commonly when + / - 1 ℃, 50 + 3 ℃, 60 ℃

    For + / - 5 ℃ above, if more than 60 ℃ high uniformity requirements can use PLC for more control or to control in the form of composite aircraft.

    5: do aging temperature points and the total power of the product (involve the exhaust system, exhaust temperature is according to room size range and products to constant temperature is required in a power point, when the product is high fever exhaust fan operation to ensure that the temperature control in setting temperature)

    Temperature: the aging room often do involve the exhaust system, according to the total power of the aging room products (heating power), and then according to the need to set temperature, through the corresponding formula to calculate the power of the exhaust fan exhaust duct size. On the market at present is the most advanced hot air circulation technology, the temperature uniformity is very good.

    The characteristics of the aging room

    1. Accurate temperature control, high precision. Due to the unique air duct system design and electric control system, can maintain a high uniformity of the room temperature, much higher than similar products.

    2. Room set temperature range, continuously adjustable. In the temperature + 5 ℃, 60 ℃ (room temperature + 5 ℃ -- 80 ℃) range can be set freely. If the customer special request, can design a higher temperature.

    3。 The system to protect the function is all ready, to ensure safe and stable long-term trouble-free operation。

    4. Laboratory of advanced design reasonable structure, supporting products and functional components with leading peer advanced level, can adapt to long-term, stable, safe and reliable production requirements. Can meet the requirements of users for the purpose of processing production, and use, operation, easy maintenance, long service life and aesthetically pleasing, has a good user interface, the user's operation and monitoring is more simple and intuitive.

    5。 Equipment main part selects the high quality products of well-known brand manufacturers at home and abroad, to ensure the quality and performance of the machine

    6. Beautiful appearance, convenient construction, short construction period.

    Note: this test equipment is prohibited

    1: inflammable, explosive, easy to volatile substances sample test and storage

    2: the corrosive substance sample test and storage

    3: the test of biological samples or store

    4: strong electromagnetic emission source of sample test and storage

    Company profile

    Suzhou rich automation equipment co。, LTD。, formerly suzhou huada electrical and mechanical equipment factory, the company is a professional engaged in liquid and powder dustless coating equipment engineering and automation equipment engineering of modern high and new technology enterprise。 Company project planning, research and development, manufacture, installation, service and technology of whole factory output as a whole, the product research and development, production, installation and after sales, sales through-train service。 Geared to the needs of users with excellent product quality, perfect service system, the highest efficiency to meet customer demand。 Products are widely used in: automobile industry, motorcycle industry, 3 c industry (mobile phone, computer, household appliances, decorative building materials, sports equipment, wood furniture, engineering machinery, lighting, electronics and other industries。

    With the modern economy, the rapid development of science and technology, we always pay attention to the introduction of advanced automation technology at home and abroad to strengthen and guide, relying on the company with the well-known domestic enterprises for the market, with its own technical advantages successively with a number of zhu name brand enterprise established the good relations of cooperation。 Like Japan panasonic semiconductor co。, LTD。, Taiwan foxconn group, Qingdao haier group, suzhou benq corp, Germany Bosch automotive parts (suzhou) co。, LTD。, South Korea's samsung electronics (suzhou) co。, LTD。, suzhou asustek computer group co。, LTD。, Taiwan, Taiwan curzon technology, co。, LTD。, Shanghai Volkswagen, Shanghai hao automobile components co。, LTD。, the United States, machinery (Shanghai) co。, LTD。, and other famous enterprises to undertake several ten sets of large coating engineering and automation equipment engineering, and provides the high quality service and technical guidance, age comes as substantial wish with all my colleagues will be "quality as this, to create excellence" principle, with the domestic companies to create business fashion。

    Specializing in the production of:

    Plastic spraying line, coating equipment, metal powder, liquid paint line, metal pre-treatment production line, coating line, screen printing lines, water poon cabinets, ark of electrostatic dust removal, paint spraying machine, UV curing oven, IR curing furnace,

    Drying equipment: oven, clean oven, blast oven, nitrogen oven anti-oxidation, tunnel furnace, aging room,

    Conveying equipment: conveyor line, assembly line, assembly line, drum line, chain plate line, times speed chain line, assembly line,

    Dust-free purification equipment: clean compartment, epoxy floor paint, transfer window, clean bench, clean booth, sample car,

    Environmental protection equipment: fresh wind ark, central air conditioning, cleaning tank, cleaning tank, waste gas treatment, dust collection box,

    Testing equipment: constant temperature and humidity testing machine, life testing machine, tensile testing machine, salt spray test machine, environmental test machine

     

    Touch: the roots rong manager

    Business address: China jiangsu wuzhong district suzhou city near lake town, stone village industrial zone in B1 building

    Mail editor: 215106

    The company telephone: 86 512 66300668-66300668

    The true: 86 512 66300667

    Hand machine: 13912610668

    E-mail: skyfeeson@yahoo.cn

    Website: http://www.feeson.cn/

上一篇   |   下一篇

扫一扫,添加好友

在线客服
PK10计划 全天PK10计划 PK10计划 PK10计划 PK10计划 全天PK10计划 PK10计划 全天PK10计划 PK10计划 PK10计划